Přeskočit na obsah

Záloha metadat/Kychot/GoFlex/00/kernel

Z Wikiverzity

Záloha metadat/Kychot/GoFlex/kernel

/var/log/kern.log

[editovat]

Hlášky jádra.

  • Po připojení:
Nov 28 07:08:11 mi kernel: [69848.784155] usb 1-3: new high speed USB device using ehci_hcd and address 11
Nov 28 07:08:11 mi kernel: [69848.919286] usb 1-3: configuration #1 chosen from 1 choice
Nov 28 07:08:11 mi kernel: [69848.920778] scsi4 : SCSI emulation for USB Mass Storage devices
Nov 28 07:08:11 mi kernel: [69848.922508] usb-storage: device found at 11
Nov 28 07:08:11 mi kernel: [69848.922523] usb-storage: waiting for device to settle before scanning
Nov 28 07:08:16 mi kernel: [69853.920461] usb-storage: device scan complete
Nov 28 07:08:16 mi kernel: [69853.921317] scsi 4:0:0:0: Direct-Access     Seagate  FreeAgent GoFlex 0148 PQ: 0 ANSI: 4
Nov 28 07:08:16 mi kernel: [69853.925546] sd 4:0:0:0: Attached scsi generic sg2 type 0
Nov 28 07:08:16 mi kernel: [69853.929218] sd 4:0:0:0: [sdc] 976773167 512-byte logical blocks: (500 GB/465 GiB)
Nov 28 07:08:16 mi kernel: [69853.929874] sd 4:0:0:0: [sdc] Write Protect is off
Nov 28 07:08:16 mi kernel: [69853.929896] sd 4:0:0:0: [sdc] Mode Sense: 1c 00 00 00
Nov 28 07:08:16 mi kernel: [69853.929909] sd 4:0:0:0: [sdc] Assuming drive cache: write through
Nov 28 07:08:16 mi kernel: [69853.931751] sd 4:0:0:0: [sdc] Assuming drive cache: write through
Nov 28 07:08:16 mi kernel: [69853.931780]  sdc: sdc1
Nov 28 07:08:16 mi kernel: [69853.999391] sd 4:0:0:0: [sdc] Assuming drive cache: write through
Nov 28 07:08:16 mi kernel: [69853.999419] sd 4:0:0:0: [sdc] Attached SCSI disk

/proc/scsi/scsi

[editovat]
Host: scsi4 Channel: 00 Id: 00 Lun: 00
  Vendor: Seagate  Model: FreeAgent GoFlex Rev: 0148
  Type:   Direct-Access                    ANSI  SCSI revision: 02

/proc/scsi/usb-storage/4

[editovat]
   Host scsi4: usb-storage
       Vendor: Seagate
      Product: FreeAgent GoFlex
Serial Number: NA0D2RAN
     Protocol: Transparent SCSI
    Transport: Bulk
       Quirks: SANE_SENSE


[[Kategorie: